Hammer the big button and measure how many presses you get in 3, 5, 10 or 20 seconds. In the Workshop you charge up by tapping and discharge to get 5 machines running. A free browser game where you chase your personal best with a total count and a second-by-second chart.
How to play Rapid Tap Bench
Choose Tap Test, Workshop or Practice and press the ready button.
Press and release the red TAP button over and over. In the Tap Test the clock starts on your first press. In the Workshop you can tap once READY disappears.
The result appears inside the game. Play again repeats the same settings, and Choose mode lets you change them.
| Action | Phone or tablet | PC |
|---|---|---|
| Tap | Tap the red button | Click the red button, or press Space / Enter |
| Discharge | Press Discharge once charged | Click Discharge, or press B |
| Pause and resume | Pause and Resume at the top | The on-screen buttons, or P |
| Enlarge the view | Full screen or Enlarge | The same button. Back leaves it |
Key repeat from holding a key down is not counted. On the tap button, no other simultaneous input counts until the finger or key that is down has been released. When a menu button has keyboard focus, Space / Enter operate that button.
3 modes
Tap Test: how many presses?
Choose 3, 5, 10 or 20 seconds. The first press counts as one, and the time you wait before it is not measured. Presses after the time limit are not added, and the total number of presses is saved as the record for that setting. Nothing during the test raises the count for you.
Workshop and Practice
The Workshop is a run of 5 machines: bring each machine’s remaining value down to 0 with taps and discharges before its time runs out. Each time a machine starts running you pick a part as an upgrade. The run ends when time runs out. Practice has no time limit, and choosing Pause and then End here shows the result. No best is saved for Practice.
Test lengths and Workshop difficulty
| Tap Test setting | Good for |
|---|---|
| 3 seconds | A short all-out burst |
| 5 seconds | Checking speed and pace |
| 10 seconds | The standard test. The default |
| 20 seconds | A longer test to compare the first and second halves |
| Workshop difficulty | Value of the first machine | Time per machine |
|---|---|---|
| Easy | 16 | 6 seconds |
| Medium | 24 | 6 seconds |
| Hard | 34 | 5 seconds |
| Expert | 46 | 5 seconds |
The machine value in the Workshop goes up by 4 with each machine. The READY before each machine lasts 0.9 seconds and is not part of the time allowed, and the clock also stops while you pick a part. The Tap Test and the Workshop have separate rules and separate records.
Discharging your charge and choosing parts
In the Workshop, one tap deals 1 damage and adds 1 charge. At first you can discharge at 12 charge for 12 damage. Charge can be stored up to twice the amount needed, and what is left over carries on to the next machine. Decide whether to get the current machine running sooner or keep some for the next.
| Part | Effect per step | Limit |
|---|---|---|
| High Output | Discharge damage +6 | 2 steps. 24 damage at most |
| Fast Charge | Charge needed to discharge -2 | 2 steps. 8 at the lowest |
| Cooling Fins | Time for each machine +0.6 seconds | 2 steps. 1.2 seconds more at most |
You pick a part 4 times in total, right after machines 1 to 4 start running. A part that has reached its limit cannot be picked. When an upgrade lowers the charge limit, any charge above the new limit is cut off. Discharges and parts do not appear in the Tap Test or Practice.
Scoring, chart and personal best
In the Tap Test the total number of presses is the record. The average is the total divided by the seconds of the setting: 160 presses in 10 seconds is 16.00 taps per second. Best second is the highest count in any one-second slice of the chart. The first and last halves split the set time in two, so on the 3-second setting each is 1.5 seconds.
In the Workshop each tap is 1 point, and getting a machine running adds 50 points plus 2 points for every 100 milliseconds left. Discharge damage itself adds no points. The result chart shows the whole measured time for the Tap Test, and the taps of the last 20 seconds of play for the Workshop and Practice. READY, part picking and pauses are not included.
The 4 Tap Test settings are recorded in taps and the 4 Workshop difficulties in points. Records from the earlier 10-second test are kept in their own list, Earlier records, and are not replaced by new ones. All records stay in the storage of the same browser and are not shared with other devices. The game can be played with storage blocked, but records may not be kept.
A run that includes a manual pause, a move to another tab, a change of screen size or orientation, a switch of view, or a stall of more than 350 milliseconds is unofficial and does not update your best. After an automatic pause you resume by hand. Where full screen is not supported, the enlarged view inside the same page is used. Sound and, on devices that support it, vibration are switched separately.
Use the same device and the same input method when you compare results. Take a break when your fingers or arm get tired.
